Archiv für den Monat: September 2021

The 1845s Day Dress Tutorial Part 2 (Step 5 – 8)

Part 1 – Getting started Step 1-4

(5) The fronts and backs are ready prepared to be stitched together. First seam will be the shoulder seam, stitched from the back with a backstitch. I recommend to sew this seam by hand. At point (1 – red arrow) just the back is notched V-shaped and the seam allowances of the shoulder trimmed back to ¼” (5mm).

The seam allowance along the back neckline is trimmed back too, just leaving the uppermost layer of the piping.

Weiterlesen

The 1845s Day Dress Tutorial Part 3 (Step 9 – 12)

Part 1 – Step 1-4

Part 2 – Step 5-8

(9) Take the bodice and mark the stitching line around the armhole. Line up another length of piping and baste in place. Trim back the cord only at the start and stop (in the range of the armpit) to remove bulk and fold the ends of the bias tape crossing each other.

Insert the sleeve into the armhole, right sides together, matching the sleeve seam with the side seam of the bodice. Ease in the excess width of the sleeve by pulling the threads and spread evenly along the sleeve head. Sew the sleeve with a backstitch, right beside the piping cord (sew from the side of the bodice to get better controll of the piping cord). Trim back the seam allowances and neaten with an overcasting stitch.

Weiterlesen