Monthly Archives: September 2018

An 1830´s Frock Coat Part 3

Part 1 

Part 2 

The sleeve cuff shown here is different to the cuff described in the sewing instructions, but similar.
Sew together top and under sleeve along the front sleeve seam and attach the interlining with basting treads. In the sewing instruction, the interfacing reaches the bottom edge. Underneath you can see the cuff pined along the bottom edge, right sides together. I decided to use the fashion fabric for the cuff with raw edges to avoid bulk with that heavy fabric.

IMG_4433

For that reason I used a cotton fabric for lining the cuff. The cuff lining is cut with seam allowances, these are turned in and pressed. The two layers are joined narrow by the edge with small stitches. Better than shown on the pics would have been to stitch down the vent facing (left side) and seam allowance (right side) first.IMG_4434IMG_4437

Continue reading

An 1830´s Frock Coat Part 1

My new sewing pattern is now available on Etsy. Therefore I want to show you some additional pictures to facilitate your sewing process. I´d try to show you historical sewing techniques and processing, so again many hand stitches will be necessary.
The instructions and pictures here in my blog are deviating from the illustrations in the sewing instructions, because the sewing pattern still was under the way at that time. My Frock Coat has got a lapel and collar from a cheaper pile fabric, this can be basted compared to real velvet, without showing stitching lines after removing the basting threads.
The lapel isn´t cut on, but sewn on as usual at that time.

 


 Here you can see the front part, with the already sewn on lapel. The interfacing is lined up with the front and basted. You barely can see the pad stitched lapel.

 

IMG_4410IMG_4411 Continue reading