Monthly Archives: December 2019

1790´s Men´s Waistcoat sew-along Part 3

Part 2

Next day I started to prepare the fronts from fashion fabric and marked the pocket opening on the right fabric side with basting threads. For reinforcement I basted a rectangular piece of interfacing to the wrong fabric side, covering the pocket opening.

This was a quick and dirty pocket, this sloppy opening will be covered by the welt later.

Continue reading

1790´s Men´s Waistcoat sew-along Part 1

A few years ago, I started this waistcoat project for my husband for a visit of the Castle of Delitzsch (Germany). It was summer and I decided to sew the waistcoat completely by hand outdoors, enjoying my garden while sewing. However, the best thing was that I did not forget to make as many pictures of the sewing process as possible. And here we go!

I prepared all pieces from fashion fabric and lining in my sewing room and moved then on my terrace, where I lined up the backs, right sides together, and stitched along the center back seam, starting at the top until reaching the top of the vent. To make a flat felled seam, I trimmed back the seam allowance of the right back to ¼” (5mm) from top to the vent and notched the seam allowance of the left back to fold over the trimmed back seam allowance of the right back. Without an iron available in the garden, I folded the edges with the nail of my thumb. I felled down the edge with small stitches, barely visible on the right fabric side.

Continue reading