My latest pattern #0222, the fall front breeches around 1800, are hand-sewn in the instructions. Sometimes it has to be quick and easy, so I want to show you how you can easily sew the breeches mostly with the sewing machine.
So let’s start with our machine sewing project and basically stick to the original instructions.
Mark all the stitching lines on the front trousers (vent), fall front placket and on the underfall. Line up with the belonging stitching lines, right sides together and sew, stopping exactly at the mark.
I managed to finish most of my new Regency menswear collection in time for the start of Bridgerton season 2, starting with the waistcoat in this blog post.
Shirts during the Regency period are still cut like last century shirts so no additional pattern is required, pattern #0521 fits perfectly.
As always, the blog post is intended as support for working with one of my patterns, mainly photos are shown for work steps that may be unclear.
Let’s start with point (1), cutting the vest out of the fabric! Not much fabric is needed for the waistcoat, I used an old silk dirndl apron from my stash.
silk organza flatliningthe linen canvasFinally, all the layers lined up.Continue reading →
lining up the three layers, fashion fabric, flatlining and canvasmatching the collar notchesCatch stitch the seam allowances to the collar canvasContinue reading →
I´m sorry, that I didn´t made lots of pictures during the sewing process because I was in a hurry, I made a mistake when cutting the skirt, but I love the result. Due to the newest release of Bridgerton Season 2 I don´t want to withhold this pattern from you.
Let´s start with sewing! Just some considerations before we´ll start. Take care that there are no extra pattern pieces for the skirt. The skirt is made from panels of fabric, cut into rectangle and trapezoidal pieces. The following diagram shows how to cut the skirt from different fabric widths.
This is another overview how to estimate the width of your panels. The measurements do not necessarily have to be observed exactly. The width of the front panel should be 1,5 times the length from mark ② to mark ② on the waistband. The side panel should measure about 2 times the length from mark ② to mark ③, and the back panel about 4 times from ③ to ④. (When sewing a larger size with 35” (90cm) wide fabric, you´ll have to piece one of the side panels as shown on the diagram – piecing is period). The remaining fabric strips will be used for the box pleated frill at the hem.
(1) The importance of a mock-up: Quite sloppy pics of my mine. You can see the additional length at the front to fit over the bust.
(12) Cut stripes from a sheer fabric for the ruffles, about 1 ½ to 2 times as long as the edges to be trimmed and about 2 ¾” (7cm) wide. Roll hem the two short and one long edge and gather the remaining raw edge.
Take the cotton tape, cut to the length of the edge to be trimmed, and fold in half lengthwise, turn in a narrow seam allowance along the short edges. Slide the gathered edge of the ruffle between the two layers of the tape and stitch in place through all layers. The ruffles are attached to the inside of the neck opening and cuffs with a running stitch and can be removed for washing easily.
English 
Deutsch