1780´s Redingote for WGT 2019 /

Preparing for the WGT 2019 I bought some meters of a brown striped taffeta fabric. It was mentioned to become a coat and trousers for my husband. But when I was finished, I still had 6m of that fabric left. First I was thinking of a steampunk inspired bustle dress, but reflecting this idea several days I decided to make a 1780´s Redingote dress matching with my husband´s 1780´s suit.

As usual I tried to make lots of pics during the sewing process and as I really love the dress, it became the first sewing pattern for a series of 18th century patterns. Please don’t be impatient, I´ll try to launch some of the new patterns this year (including some men´s patterns).

This tutorial should help to facilitate the sewing process of the Redingote, some things will be slightly different as described in the sewing pattern. Pictures and a tutorial for the petticoat are missing.

Here you see the bodice from lining, all parts sewn together and the seam allowances pressed open. Every seam is covered with a boning channel, I made mine from twill tape. The side seams are curved, filling that channels with plastic boning serves, but with a stronger bend I´ll recommend not to follow the seams anymore. Let the channel run straight towards the shoulder seam.

Continue reading →

How to get small, regular pleats on 17th or 18th century skirts

For small folds (minimum ¼” (5mm)), measure the distance of the waistband or bodice section, where you want to attach the skirt.

Let´s say 35cm for an 18th century robe a l´Anglaise. Determine the width of folds and therefore the number of folds – with a width of 5mm there would be 70 folds each side (that makes a total of 140! folds).

Measure along the top edge of the skirt, from center back to the front edge, subtract about 1” from this measurement (e.g. 138cm-2cm=136cm). Divide this measurement by the number of folds (136cm/70=1,9cm). This is how much fabric each folds contains. Transfer that measurements to the wrong side of the top edge of the skirt. Mark the fold´s width (5mm) beside. As a rule, the skirt width has to be minimum three times the distance at the bodice/waistband.

In this sample I wanted to gather 45cm into 10cm, with pleats of 5mm. That means I divided 45cm by 20, that is 2,25cm for each fold. On the picture above I marked this 2,25cm at the wrong fabric side along the top edge. On the picture below, I marked the fold´s width of 5mm beside.

Sew two rows of gathering stitches with a thicker thread on both sides of the seamline. Above you see the wrong side, below the right fabric side of the skirt with the gathering threads already stitched.

Continue reading →

How to attach soutache with the sewing machine

When I first planned my redingote it seemed there was no time left to do all that soutache embroidery I wanted to do. Sadly the event I made the redingote for was canceled, but fortunately now I had enough time. As I am a little bit lazy I was searching for a method to attach about 70 meters of soutache braid neatly to the skirt.

Continue reading →

A Muff Tutorial (Georgian, Regency, Victorian….)

I muff is an accessory which you never should omit wearing an historical fall/winter costume. The advantages are obvious. You´ll never get cold hands and you can hide all that things a modern women needs, like your car keys and of course your cell phone! With a cord or a loop attached to secure the muff around your neck or wrist you get your hands free.

Continue reading →