Schlagwort-Archive: vintage sewing

The Victorian Waistcoat – Sewing Pattern #0516 – Part 2 – Steps (3) to (9)

Part 1 – Steps (1) and (2)

After all that hand-sewing of the first part, let´s do some machine sewing on all the long seams. Remember, the sewing machine had already been invented by then, so there’s no need to feel guilty about using it!

(3) Sew the bottom facing to the front-facing, right sides together, matching all marks. Trim back the seam allowance and press towards the bottom facing. Understitch if desired.

Line up the facing with the front, right sides together, and stitch right beside the bridle tape. Trim back the seam allowances and turn the right sides out. Press the edges, rolling the seam slightly out of sight towards the garment’s wrong side. Baste along the edges to hold the pressed seam in place. At the armscye trim back the seam allowance to 3/8” (1cm) and fold around the bridle tape. First, baste, then fell stitch the seam allowance to the interfacing/bridle tape. Fell stitch the loose edges of the facing to the interfacing, stop 2” (5cm) before the collar notch.

Weiterlesen

Completing the Vintage Cycling Ensemble: Crafting a Classic Train Driver’s Hat – Sewing Pattern #0224

In our previous posts, we dived into the timeless appeal of a vintage three-piece cycling outfit, comprising the Norfolk jacket, cycling breeches, and matching waistcoat (ok, not quite finished jet, but in progress).

Now, to complete the ensemble and add that perfect finishing touch, we’re moving over to the world of headwear, with a tutorial on crafting your very own train driver’s hat or cap. This accessory not only evokes nostalgia for the 20th century but also offers practicality and style for any cycling adventure. Plus, by using the remaining fabric from your ensemble, you can achieve a cohesive look that’s both bespoke and charming.

Grab your free pattern here: Train Drivers Hat

Weiterlesen